 |
3ds Masks |
 |
| 3DS Import for SolidWorks 1.0 |
|
3DS Import for SolidWorks is a 3D Studio® (.3ds) file import add-in for SolidWorks®. This add-in gives SolidWorks the ability to import geometric data from 3DS files.
3DS Import for SolidWorks reads polygon mesh data stored in 3DS files and imports it into SolidWorks.
3DS Import for SolidWorks is very easy to use as it adds new commands to SolidWorks. It also adds a submenu to the SolidWorks menu called "3DSImport".
Released: 2006-11-23
License: $195.00
Publisher: SYCODE
Language: English
Platform: Windows
Requirements: SolidWorks
|
The import by 3DS is working very well The import is working very well
Review to 3DSImport Add in I downloaded the add-in, and make conversion of some complicated 3DS model - the result is more then bad! Some features are absent absolutely, and...
| 3DS Import for Solid Edge 1.0 |
|
3DS Import for Solid Edge is a 3D Studio (.3ds) file import add-in for Solid Edge®. This plug-in gives Solid Edge the ability to import geometric data from 3DS files.
3DS Import for Solid Edge reads polygon mesh data stored in 3DS files and imports it into Solid Edge. 3DS Import for Solid Edge creates trimmed planar surfaces for each triangular face and knits them together to create a body.
Released: 2006-11-23
License: $195.00
Publisher: SYCODE
Language: English
Platform: Windows
Requirements: Solid Edge
|
Sorry about it. Sorry but I could't trie the program, because it gives me an error.
Infortunately I can't even open and install it again.
If you could...
| 3DS Export for SolidWorks 1.0 |
|
3DS Export for SolidWorks is a 3D Studio® 3DS file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to meshes in a 3DS file.
3DS Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to 3DS file as mesh objects.
Released: 2006-11-23
License: $195.00
Publisher: SYCODE
Language: English
Platform: Windows
Requirements: SolidWorks
|
Lack of Color and x64 edition It worked fine in exporting files to 3DS format. The parts came in one color, even when our part had multiple colors for different faces. It will be...
high res? not high enough When the export is imported into 3d studio max at its highest resolution the result is far from a smooth result. The model wasn't to a high...
Doesn`t work I tried several different SolidWorks objects and the conversion was incomplete, so I could not use the output. I gave the interface a "fair" score...
Material and Meshes I'm not sure if 3DS can handle a correct color/mesh exporting but I couldn't find a way to select (in Blender) and join similar parts in large...
Very easy to use As they claim, truly "software made simple". As easy as saving a file.
| 3DS Export for Solid Edge 1.0 |
|
3DS Export for Solid Edge is a 3D Studio (.3ds) file export add-in for Solid Edge®. This add-in gives Solid Edge the ability to export 3D solid and surface data from a Solid Edge part or assembly document to 3d polygon meshes in a 3DS file.
3DS Export for Solid Edge tessellates solid bodies in a Solid Edge document into a set of triangular meshes. These meshes are then exported to a 3DS file as mesh objects.
Released: 2006-11-23
License: $195.00
Publisher: SYCODE
Language: English
Platform: Windows
Requirements: Solid Edge
|
this is does not work I try it to import .3ds but it only worked with .3dm extention
short trial for Metaseq 2.4.2 Trying to import model to Metaseq 2.4.2, first trial is relatively good. should be improve with much bigger 3D models and more time.
Error in Plugin i used the plugin but couldnt export to 3ds, when i tried, it came an error and didnt export it, so i instead used the obj import/export for trial
mesh quality Quality of the exported model insufficiently good. Exporter uses too big poligons to build a mesh. Well to understand, how to adjust quality.
| 3DMonster 1.55 |
|
Program for creating depth masks for Single Image Stereograms with 3d animation support.
Import from 3DS format. Animated depth masks for stereo animation may be saved in avi files, compressed with any available codec. No picture size limitations in registered version. Installation includes a set of sample 3DS models. May be used with any single image stereograms generator. 3DMiracle is recommended. DirectX5 based.
Released: 2007-03-25
License: $19.50
Publisher: Media Programming Group
Language: English
Platform: Windows
Requirements: DirectX 5 or higher
|
| DrapeFX Pro 1.1.26.130 |
|
DrapeFX PRO is the professional version of our DrapeFX software solution allowing you to drape color and texture into your graphic files. When you wish to create realism in your results and achieve professional quality images, DrapeFX PRO will come to your rescue.
In an image where you not only need to replace color but also apply a texture or material finish then DrapeFX PRO is the answer to your requirements. You can pick up any image, say o
Released: 2005-10-19
License: Freeware
Publisher: eVox
Language: English
Platform: Windows
|
| VIViewer 1.0 |
|
The Viewer for 3ds files with possibility to walk around objects.
- You can open a lot of 3ds files together.
- You can scale and rotate the 3ds-objects.
- You can walk around and inside the 3ds-objects.
- Simply use 4 arrow buttons for rotate or walk around the object.
- Use "plus" and "minus" buttons on numpad for scale the object.
- Use "Man" button on toolbar for switching "walk" or "look" mode.
Released: 2005-08-11
License: $14.00
Publisher: Valeri Vlassov
Language: English
Platform: Windows
|
| Easy Stereo 1.10 |
|
Professional utility for creation of high-quality stereograms.
It can create stereograms from 3D-objects or prepared depth-masks,
export depth-masks, create animated stereograms, print rendered
stereograms.
Supports rendering with low and high resolutions, therefore it can be
used by single users or in printing offices.
Program possesses the beautiful and easy interface
with support of external skins and plugins.
Released: 2003-01-10
License: $19.00
Publisher: Victorovich Soft.
Language: English, Russian
Platform: Windows
|
Easy Sterio The Easy Stereo UI is very good, being intuitive and easy to operate. There is a variety of sample models and wallpapers to get you started. 3DS...
Good programm It's a pleasure to use easy stereo because it's easy and you can make great stereograms with nice textures!
see ya
| Kids Mask Factory 2008 1.2.5 |
|
Kids Mask Factory, is a program which is aimed at both children and parents, depending on age and skill. The program is designed to create masks which can be worn. This is done by selecting face parts and adding them to the mask. Freehand lines can also be used with color to great effect.
Masks can be created in just black and white which can then be printed and colored in with felt tip by the child; or can be filled with color.
Released: 2008-05-13
License: $25.99
Publisher: Mindwarp Consultancy Ltd
Language: English
Platform: Vista, Windows
|
| 3DSpins! 2 Pharaon Blade for Windows V1.0 |
|
Tired of killing slimy aliens and blow up zombies? Do you want a new gaming experience? Try 3DSpins! 2 - Pharaon Blade!
Exercise caution as you move your spinning top through a beautifully rendered 3D maze. This fun game puts you in control of the RCSM, the Remote Controlled Spinning Machine, a device that rotates, jumps over platforms, runs, fires radio-controlled missiles, and more.
100 levels! Eng, Deu, Fran, Ita, Esp.10 Levels are FREE!
Released: 2005-04-24
License: $15.00
Publisher: The Foundation Company
Language: English, French, German, Italian, Spanish
Platform: Windows
Requirements: DirectX, VideoCard with OpenGL support
|
|
Audio & Multimedia
file